7
3
4
31
31
37
33
Square Holes
2. Orient the Crossbar (2) so that the warning
decals are in the position shown.
Attach one end of the Crossbar (2) to two Joint
Plates (35) with two M10 x 68mm Bolts (27)
and two M10 Locknuts (31).
Do not tighten the
Locknuts yet.
Attach the other end of the Crossbar (2) in
the same way.
3. Orient the Base (33) so that the square holes
are facing the floor.
Attach the Base (33) to the Front Leg (4) with
two M10 x 35mm Carriage Bolts (37) and two
M10 Locknuts (31).
2
27
35
2
Warning
Decals
31
4. Attach the Front Leg (4) to the Frame (3) with
two M8 x 45mm Bolts (28), two M8 Washers
(39), and two M8 Locknuts (38).
Make sure
that the Locknuts are in the indicated hexag-
onal holes; do not tighten the Bolts yet.
4
4
3
38
28
39
Hexagonal
Holes
