6
1
27
35
35
35
1
10
31
1.
Orient one of the Uprights (1) so that the
Upright Cover (10) is on the side shown. Next,
orient two Joint Plates (35) as shown. Attach
the Joint Plates to the Upright with two M10 x
68mm Bolts (27) and two M10 Locknuts (31).
Do not tighten the Locknuts yet.
Repeat this step with the other Upright (1)
and the other Joint Plates (35), making sure
that they are oriented as shown.
1
To make assembly easier, make sure
that you have read the assembly tips in
the box above.
ASSEMBLY
• To hire an authorized service technician to
assemble the weight bench in your home, call
1-800-445-2480.
• Assembly requires two persons.
• Because of its size and weight, assemble the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
• To identify small parts, see page 5.
• The following tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
