Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two people.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
•
For help identifying small parts, use the PART
IDENTIFICATION CHART.
The included hex key and the following tools
(not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
5
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
1.
Orient the Right Adjustment Frame (3) as shown;
note the position of the Axis Knob (31) and the
indicated hole. Attach the Adjustment Frame to
the Right Base (2) with four M10 x 95mm Button
Bolts (66), four M10 Washers (65), and two M10
Nylon Locknuts (83).
Repeat this step with the Left Adjustment
Frame (not shown).
3
66
66
65
31
Hole
65
65
65
2
83
83
1
Before beginning assembly, make sure that
you have read and understand the informa-
tion in the box above. Refer to the PART
IDENTIFICATION CHART for help identifying
small parts.
