13
E. Installing the ROOF PANEL
1. The side with the power supply box faces upward.
2. The edge nearest the power supply is the front of the ROOF PANEL. Be careful of the wires
coming from the SIDE and REAR PANELS when you set the ROOF PANEL down onto the panels.
Feed the wires through the holes in the ROOF PANEL. Feed the control cable and CD connectors
down from the ROOF PANEL through the long-shaped hole to the inside of the sauna (for CD/radio
hookup). (see Figure 14 and Figure 15)
3. Be careful not to force the ROOF PANEL into place. Make sure that the wires are properly fed
through the holes.
4. When all the wires are fed through their appropriate holes, lower the ROOF PANEL into place.
5. Insert the (2) screws that mount the front wall panel to the roof and floor panels. (see figure 15a)
Figure 15
Figure 14
Inside View at the Ceiling
Inside View at the Floor
Figure 15a