9
Figure 6
V. Panel Descriptions
For easier installation, please understand and distinguish the differences between each panel.
A. Floor Panel
When the floor panel faces upward, you will find that the edges are raised. The wall panels will
seat inside of the raised edge. The front of the floor panel is indicated below. Please note the
correct position before you began assembling the wall panels. (see figure 7)
Figure 7
B. Understanding The Difference Between The Top And Bottom Of The Wall Panels
The wall panels are in the upright position when the ¼ round molding on the interior
wall panels is at the top
. In addition, the heater cords are also at the top. Place the heater
cords to the outside of the sauna room before the roof is placed on top of the unit. These
heater cords will be feed through the roof panel and connected once the roof panel is placed
on top of the sauna room. (see Figure 8)
