manualshive.com logo in svg

GoldenDesigns GDI-6365-01, Owner'S Manual, Page: 12 / 31

Share
Download
GoldenDesigns GDI-6365-01 Owner'S Manual Download Page 12

11 

 

D.   Understanding The Difference Between The Inside And Outside Of The Rear Panels

 

 

                      You will find the heat emitter panels on the inside of the rear panel. 
 
 
 
 
 
 

Assembly Instructions

 

 

A.  Choose a good location to assemble the sauna

 

 

1.  The location must be dry, leveled, and away from any source of water 

 

2.  MAIN POWER cord must be easily accessible 

 

3.  Two adults are required for installation 

 

4.  Wood cabin installation order:  Floor Panel     Left Side Panel     Front Panel     Right Side   
       Panel     Right Side Rear Panel     Left Side Rear Panel    Roof Panel    Floor Emitter Panel      
           Bench Emitter Panels    Benches     Roof Cover 

 

5.  Tools Required: Philips Screwdriver and Ladder 
 
 
 

 

B.  Installing the FLOOR PANEL

 

 

 

1.  Place the FLOOR PANEL on the floor.   Turn the FLOOR PANEL right side up and make      

                            sure the front is positioned correctly.  (see Figure 10) 

 

 

 
 
 
 
 
 
 
 
 

 

 

    Figure 10                                          
                                                       

Front

   

 

 
 
 
 

C.   Installing the LEFT SIDE PANEL, FRONT PANEL, and RIGHT SIDE PANEL

 

 

1.  Determine the correct placement of the LEFT SIDE PANEL in the figure diagram below.   
       Insert the LEFT SIDE PANEL onto the FLOOR PANEL.  Then place the FRONT PANEL   
       onto the FLOOR PANEL next to the LEFT SIDE PANEL.  Lift the LEFT SIDE PANEL up  
       and onto the guide brackets on the FRONT PANEL.  You will need to make sure the walls  
       are properly inserted into one another and that the LEFT SIDE PANEL is pulled all the way  
       down and level with the FRONT PANEL at the top.  The process for the RIGHT SIDE PANEL 

Summary of Contents for GDI-6365-01
































Reviews:

No comments