GOLDEN MASK 5+ User Manual Download

Page: 12 / 14

Golden Mask 5+ User Guide

GMD -

www.goldenmaskdetectors.com - Golden Mask Official Distributor

Golden Mask 5+ User Guide

GMD -

www.goldenmaskdetectors.com - Golden Mask Official Distributor

NOTE: The Light version of the detector is delivered without wireless headphones and

wireless transmitter. It does not have the WS/SP switch.

WARNING! The detector and the wireless headphones are factory-paired. You cannot

use other models and brands, only the ones the detector is delivered with will work.

Charging the detector batteries

The Golden Mask 5+ is delivered with pre-installed 10 x 2500mAh 1.2V AA-size NiMh

rechargeable batteries (this is subject to change, while shipping batteries in some destina-

tions is prohibited). The batteries have a life of around 300 cycles charge/discharge.
You can replace the supplied batteries with any standard-size NiMH rechargeable batter-

ies of type AA. You can also use standard AA 1.5V alkaline batteries.
To charge the detector batteries, connect the Golden Mask Smart charger jack to the

charging port of the detector on the backside of the battery box (see the above graphic).

A red light will be lit on the charger. After the charging is complete, the light will turn to

blue color. You can now disconnect the charger and start using the detector.

ATTENTION! Do not turn on the detector until the charging process is finished and

the charger is disconnected! Otherwise the detector electronics may be damaged!

INPUT UNIT:

Rated Voltage: AC110/220Vl

Voltage allowed: AC90—265Vl

Rated Freq: 50/60Hzl

Rated Current: 100mA (220V full load):

200Ma/100V

20mA (220V no load)

Max Current: 150mA (220V full load)

30mA (220V no load)

OUTPUT UNIT:

Ratedl Voltage:Automatically adjust from

6V—15V

Max voltage (with no load): 20V

Rated Current: 500mA (450mA---600mA)

Trickle Current: 35--50MmA (Pulsel ratio 1/20

+10mA)

Short Circuit Current: 10—20mA

Battery repairingl Current (Voltage less than 6V):

50-100MA

CONTROL UNIT:

V Detect: D -l -5mV

V Detect: 50—65SD 0

Temperature protect: Power Supplier IC =l

150°C

Temperature protect (optional): Battery

package 45—55°C

Using 10K MF52 NTC, B=3950

Battery numbers: 5—10 PCs series connected

Pulsel ratio: 31/32 512mS/Pirode

Timer: 6 Hours

ENVIRONMENT:

Ambientl Temperature: -10—40°C

Ambient Humidity: 30%—85%

Storagel Temp: -20 —70°C

Storage Humidity: 30%—90%

Specifications of the smart charger

WARNING!

Never try to charge non-rechargeable batteries!
Do not connect the charger to the detector when inside the bat-

tery box are installed non-rechargeable batteries!
Such action will cause fire!

Charging the headphones battery (except LITE version)

The wireless headphones are powered by an internal non replaceable battery. The head-

phones are charged through an USB cable (supplied within the package) by connecting it

to the supplied wall socket, to an USB adapter or by connecting it to the USB port of your

computer. A phone charger with standard micro-USB jack could be used as well.
The charging process is indicated by a green light on the headphones. When the light

turns off, the charging is complete and you can disconnect the USB cable and start using

the headphones.

Plug ON

No batteries

Charging Progress

Full charged, trickle on

Short circuit

Battery reverse

Repairing Batteries

NTC thermistor short

Battery voltage too low

Temperature protect