background image

10-30-09 Revised 3-27-14 V5

SENSIT® HXG-2d

Combustible Gas Detector

INSTRUCTION MANUAL

Read and understand Instructions before use.

#750-00022 Instruction Manual

Suitable for combustible gases
such as Methane, Butane, Propane
and Natural Gas

MADE IN USA

Intrinsically Safe for Use in

Class I, Groups C and D, T3

Hazardous Locations

WARRANTY

Your SENSIT

®

 HXG-2d instrument is warranted to be free from

defects in materials and workmanship for a period of two years
after purchase (excluding sensor, calibration and batteries).  If
within the warranty period your instrument should become inop-
erative from such defects, the unit will be repaired or replaced at
our option. This warranty covers normal use and does not cover
damage which occurs in shipment or failure which results from
alteration, tampering, accident, misuse, abuse, neglect, or im-
proper maintenance. A purchase receipt or other proof of date of
original purchase will be required before warranty performance
will be rendered. Instruments out of warranty will be repaired for
a service charge. Return the unit postpaid and insured to:

SENSIT TECHNOLOGIES

851 Transport Drive

Valparaiso, IN 46383

Phone: (219) 465-2700

Fax: (219) 465-2701

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

AEx  ia IIB T3
IP20
For use in clean dry areas only.

710183

UL 913

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 906-00000-08









Reviews: