4
(Continued on page 5)
GENERAL DESCRIPTION
SPECIFICATIONS
5
BACKLIT DISPLAY
SPEAKER
(ON BACK)
WARNING LED
16” FLEXIBLE
GOOSENECK
SOLID STATE
SENSOR
PUSH BUTTONS
BATTERY
COMPARTMENT
BATTERY SLEEVE
RETAINING SCREW
SENSOR
FILTER
PRODUCT FEATURES
SENSOR SPECIFICATIONS
TYPE
RESOLUTION
RANGE
ACCURACY
PPM
10ppm
0-990ppm
±10%
LEL
0.1%
0-100%LEL
±10%
PRODUCT SPECIFICATIONS
Size:
10” x 3” x 1.6” (254 x 76 x 41 mm)
Weight:
1.2 lbs. (544g)
Operational Temp:
-20 to 40°C (-4 to 104° F)
Battery Life:
Alkaline: 50 hours continuous
The Sensit® HXG-2d is designed to detect combustible gases.
This instrument incorporates an advanced low power semicon-
ductor sensor to measure a wide variety of combustible gases
in both the PPM and %LEL range. The PPM readings auto-range
to %LEL when the concentration exceeds 990PPM (2%LEL meth-
ane). Optionally all readings can be set to a resolution of
0.1%LEL only (PPM off). An “on demand” backlight allows use in
dark environments. A user activated “TICK” control assists in
locating small gas leaks. Audible and visual alarms warn the
operator of hazards. The alarms can be set in either the PPM or
LEL modes. The default alarm is 10%LEL methane.
The instrument is adjusted at the factory for either methane or
propane as the primary gas, and is calibrated accordingly. The
primary gas can be selected when ordering.
The Sensit® HXG-2d meets US UL913 requirements when used
with approved batteries.
The Sensit® HXG-2d is operated using approved alkaline bat-
teries only.
WARNING: Never mix batteries of different age or type.
www.
.com
1.800.561.8187
