CAN-bus Cruisecontrol GC90Ci installation manual
17
4.8
Increase sensitivity
Perform the following steps to increase the sensitivity.
Perform step 1-7 within 1 minute!
Step
Action
Confirmation
1
Switch the ignition OFF and ON
2
Start the engine
3
Switch the Cruisecontrol ON
2 beeps low
4
Press and hold the brake pedal during the next 2 steps
5
Operate 4 times
4 beeps
6
Operate 4 times
4 beeps
7
Release the brake pedal
4 beeps
8
Drive at least 40 km/h (25 mph) and operate once
Cruisecontrol
engages
9
Operate until beeps are audible
Number of
high beeps
10
Press the brake pedal once
4 beeps,
Cruisecontrol
releases
11
Drive at least 40 km/h (25 mph) and operate once
Cruisecontrol
engages
(Determine the result. If necessary, repeat from step 9)
12
Stop in a safe place
13
Press and hold the brake pedal and operate 4 times
1 long beep
14
Release the brake pedal
lower
higher
step
beep
Operate 1x
for 1 step
Operate 1x
for 1 step
