Godiva PowerFlow 12/10, Workshop Manual

Page: 81 / 424

80
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
16. Engine Maintenance
Refer to the Weber Engine Repair Manual for maintenance procedures relating to the
engine.
17. Adhesives, Solvents and Greases List
The following is a summary of the adhesives, solvents and greases required and the
area of application.
Page Location Adhesive
32 Front wear ring, securing to suction tube Loctite 243
33 Mechanical seal face cleaning Loctite 7063
33 Side panel, retaining screws Loctite 243
34 Rear wear ring, securing to pump head Loctite243
36 Priming valve, on screw retaining seal
washer to piston Loctite 243
44 Heat exchanger, retaining screws Loctite 243
46 Skid plate, retaining screws Loctite 243
50 Fuel tank, retaining screws Loctite 243
50 Fuel tank connections
– fuel filter, equal tee Loctite 410 and
Activator 770
52 Stub shaft, on six screws retaining stub
shaft to engine Loctite 243
52 Stub shaft splines, and corresponding pump
shaft splines CV grease, or similar
53 Mechanical seal face Soft soap solution
58 Impeller, rear centre section, inside and
ourside Soft soap solution or
rubber lube
54, 59 Mechanical seal face cleaning Loctite 7063
60 Threaded end of pump shaft and inside
impeller centre CV grease, or similar
70 Delivery valve, spindle, valve body threads,
and O ring Water proof grease,
Shell Alavania WR2 or
similar
- If fitting extended handles in place of non-
extending handles, spread on inside thread
of new handle and on frame thread Loctite 638
- If fitting a new grip to a handle, spread
along handle. Loctite 410
71 Instrument panel, retaining screws Loctite 243