Godex DT200 Series, User Manual

Page: 22 / 55

3 Printer Setting and Control
3.1 Operation Panel Introduction
POWER Button
Press the POWER button and the LED indicator lights up green. The printer is on “ Ready to print “ status now.
When printer is turned on, keep pressing the POWER button for 3 seconds will turn the printer off.
FEED Button
When you press the FEED button, the printer moves the label to the defined stop position.
If you are using continuous labels, pressing the FEED button will move label stock until you release the button again.
If you are using individual labels, pressing the FEED button will move only one label.
PAUSE PRINTING_FEED Button
Pressing the FEED button during printing will interrupt printing. When the PFEED button is pressed again,
the printer resumes printing. Example: While a 10-label print job is running, you press the FEED button to
pause the printer.
Two of the labels have been printed. To resume printing and print the remaining eight labels, you press
the FEED button again.
CANCEL PRINTING_FEED Button
Pressing the FEED button over 3 seconds during printing cancels a print job. The current print job is
cancelled.
Example: While a 10-label print job is running, you press the FEED button. Two of the labels have been
printed.
The print job is cancelled and the remaining eight labels are not printed.