GodEngine ST-1002, User Manual

Page: 44 / 72

44
in the Skype window and click the Call/Answer button at the bottom of the Skype
window with the mouse or keyboard. Then pick up the phone receiver and wait
for the contact to proceed with the call.
4.
User will hear a busy tone until phone is on-hook if the Skype contact is Offline,
rejects to take user’s call or hangs up before user does. The busy tone will be
generated when user’s status is Offline and phone is picked up or user dials a
wrong speed dial number.
Default Operation mode: VoIP
1.
Pick up the phone receiver and user can find blue color LED solid-on. Follow
above steps 2~3 in default PSTN operation mode procedures to make a Skype
call.
2.
User will hear a busy tone until phone is on-hook if the Skype contact is Offline,
rejects to take user’s call or hangs up before user does. The busy tone will be
generated when user’s status is Offline when phone is off-hook or user dials a
wrong speed dial number.
3. If user needs to make a PSTN call, user can press “#” key from phone keypad to
switch to PSTN mode. Then ST-1002 green LED is solid-on and a familiar PSTN
dial tone comes up. User can make a regular PSTN call just as user did in the
past.
4.5 Make a SkypeOut Call
User needs to subscribe for SkypeOut credits in advance of making a SkypeOut Call.
Subscription can be made on Skype web site
http://www.skype.com/ . When the
on-line subscription has been completed, user should be able to find one “service”
message bar with account status added in the Skype window. Then user can start to
use SkypeOut service. Calls, even the international calls, can be made at PSTN
numbers or at mobile phone numbers. The rate is much cheaper than the regular
PSTN rate.
1.
Set a two-digit Speed-Dial number for the SkypeOut contact. User can refer to
ST-1002 user manual “Set a Speed-Dial Number” in Chapter 2 for detailed
procedure. Pick up the phone receiver. Wait for a dial tone. Then dial the speed
dial number of the Skype contact. Wait for 3 seconds for the call to be dialed out.
Or to make an immediate call without wait by adding “#” key after the speed dial
number.
2.
Use the Skype window interface to make a call. Choose the SkypeOut contact
name in the Skype window and click the Call/Answer button at the bottom of the
Skype window with the mouse or keyboard. Then pick up the phone receiver and
wait for the contact to proceed with the call.
3. Another method to make the call is to dial the number directly from the