GodEngine ST-1002, User Manual

Page: 54 / 72

54
4.12.1 PSTN to Skype Call Forward
User can enable PSTN to Skype Call Forward function by checking Forward
incoming PSTN to Skype box. Choose a preferred Ring time before forward like 1
second and one password(up to 6 digits 0~9 Arabic numerals). This password can
protect user from any unwanted Skype/SkypeOut call forwarding. There is a default
Forward prompt wave file( two “Beep” tones) to inform user it is time to place a Skype
forward call when Forward incoming PSTN to Skype box is checked. User can also
record personal Forward prompt message in wave file and browse the file to enable
it.
Then user can make a PSTN call remotely to ST-1002 PSTN line. With “Forward
incoming PSTN to Skype” and "Forward to any Skype number" function enabled,
user can make any Skype/SkypeOut call through call forwarding function with or
without password protection. User needs to press pa"
＊
" (or"
＊
" only if user
doesn’t set password) from phone keypad after the PSTN call is connected and
Forward prompt message (two "Beep" tones as default prompt) is finished. Then user
will hear one Skype dial tone if password is pressed correctly, otherwise user will get
password incorrect reminding message up to two times. User can press pa
＊
again. After hearing Skype dial tone, user can dial any Skype speed dial number or
SkypeOut "#" keys from phone keypad. "#" key can be saved and the call
will be dialed out after 3 seconds. The first digit of Skype or SkypeOut number needs
to be pressed within 3 seconds, or the call will be disconnected. And the delay
between any two continuous digits can't exceed 3 seconds, or the forwarding calling
number might be partially dialed out.
With PSTN to Skype Call Forward function enabled, user can set a pre-assigned
Skype number to get the regular PSTN call when the incoming PSTN call can’t be
picked up within the preset ring time. The incoming PSTN call will be forwarded to the
pre-assigned Skype or SkypeOut number.
Note: Recommend user to change password regularly to protect possible
password leak and only enable Call Forward function when it is
necessary.
4.12.2 Skype to PSTN Call Forward
User can enable Skype to PSTN Call Forward function by checking box for Forward
incoming Skype to PSTN. After choosing a preferred Ring time before forward (like 1
second), then any incoming Skype call will be forwarded if user doesn’t pick up the
call after phone rings for 1 second. User needs to type up to 6 digits 0~9 Arabic
numerals as password. This password can protect user from any unwanted PSTN
call forwarding.
After user enables “Forward incoming Skype to PSTN” and "Forward to any phone
number" function, there are three kinds of call forwarding options. The first one is
user can make a Skype call to ST-1002 remotely. Then user can make any PSTN call
through Call Forward function with password protection.
The second option is to set