GodEngine ST-1002, User Manual

Page: 33 / 72

33
operation mode when there is any call in progress.
Default is PSTN mode.
Phone/Line connection
If user changes Phone/ Line connection status after ST-1002 AP program is
launched or something abnormal happens for Skype or PSTN application, please
press Refresh button to force Auto-Swap function. It will automatically swap both line
connections internally even user has a wrong connection.
If user chooses Disable Auto-Swap function, user needs to make sure Phone/ Line
ports have correct connection. Otherwise ST-1002 might not work properly.
Default is Auto-Swap enable.
Language
Three languages are available: English, Simplified Chinese, and Traditional Chinese.
If user installs ST-1002 in the operation system whose language is not in our
supported languages list, then Language will be set to English automatically.
The default language is determined by the “Select Setup Language” setting during
ST-1002 setup program is installing.
Auto start up
If this setting is enabled, ST-1002 program will be automatically loaded and executed
when the computer operating system is started.
The default setting is enable.
Initial ring
If this setting is enabled, an initial ring from the connected phone will be activated to
inform user ST-1002 is now ready for use, once the device initialization is
successfully completed.
The default setting is disable.
Skype window pop-out
If this setting is enabled, ST-1002 program will automatically bring up the Skype
window when user picks up the phone receiver and bring down the Skype window
when user hangs up the phone.
The default setting is enable.
Call delay
Call delay means how long the Skype call will be dialing out if user doesn't add "#"
key after pressing the Skype number. User can input number like 5, then the Skype
number will be dialed out after 5 seconds if user doesn't add "#" key after the Skype
number.
The default setting is 3 seconds.
SkypeOut country code