GodEngine ST-1002, User Manual

Page: 51 / 72

51
4.10.3 Switch calls in a Multi-Call
When user wants to switch between contacts in a Multi-Call, he/she can press the ”
＊ ”
and “1” keys and soon there is a Skype dial tone coming up. Pressing the
“
＊ ”
and “1” keys again after the dial tone, the talk is then switched to the next
reserved call.
The sequence of the switch circulation is the same as the sequence these calls were
established. For example, user sets up call 1 to call 5. After user talks to call 5, the
next switch will be call 1.
4.10.4 Hang up the current call
1. During a Multi-Call call (at least 2 contacts), the current call will end after 3
seconds if user presses “
＊
” key. A Skype dial tone comes up and user can
decide to make a new call or switch back to the reserved call.
2. If the current call is a PSTN call, pressing “
＊
” key will disconnect the PSTN
call and switch to VoIP mode, and then a Skype dial tone comes up.
3. When user wants to cancel the current dialing call, press the “
＊
” key. The
dialing call can be cancelled and then a dial tone comes up. User can decide to
make a new call or press Multi-Call function key “
＊
1” to switch to next reserved
call.
4. When user makes a Multi-Call to a contact with Skype Voicemail function enable,
user can decide to hang up the call by pressing “
＊
” key or Multi-Call function key
“
＊
1” when the call enters contact’s Voicemail. Then a dial tone comes up and
user can decide to make a new call or switch to a reserved contact by pressing
Multi-Call function key “
＊
1” again.
5. When user makes a Multi-Call to a contact with an answering machine phone,
user can decide to hang up the call by pressing “
＊
” key when the call enters
contact’s answering machine voice mailbox. Then a dial tone comes up and user
can decide to make a new call or switch to a reserved contact by pressing
Multi-Call function key “
＊
1”.
4.10.5 End all calls
User can hang up the phone to end all calls.