HOW TO LAMINATE
☞ Laminating Roll Film Loading for Lamination
Laminating film width has to be narrower than substrates' one by 5~10mm.
Laminating film has to be positioned inside from the substrate's edge by 5mm.
1. Remove the Roller Safety Cover.
2. Put a substrates from the laminating roller to the pull roller.
Substrate length is enough to be reached to the pull roller.
No need to use substrate for job. the important is its length.
3. Pull the Laminating film to be reached to the Laminating Roller.
When the glue is melted by roller, then attach the substrate to the film.
4. Feed substrates for job.(Roller Safety Cover has to be installed.)
Press "LOADING" button to open the Feeding Gate.
WARNING
:
Do not wear necktie, necklace, long-raced or that kind of clothes.
These could be wound in the driving device and will be a cause of fatal injury.
PROTOPICllI-540
PROTOPICllI-540DUAL
29/48
