ERROR MESSAGE
☞ "EMS & COVER OPEN!!"
This is displayed when Roller Safety Cover is opened or when E-STOP Switch is pressed.
In emergency case, the switch makes Roller operation and System stop.
Roller Safety Cover is to avoid burn from contact to high temp. roller
Then, keep this in close status except film loading.
After the cover is closed and make the switch release to back to normal.
NOTE : This message is shown for 3 secs. as the RUN is pressed.
☞ "S-opn"
Temp. Sensor is short or Contact between Slip Ring & Brush is not good, the message is displayed.
As this message is displayed, check the mentioned parts.
WARNING :
Power has to be "OFF" to check the mentioned parts.
Roller Cover
E-STOP S/W
Release E-STOP S/W
Error Messages
Brush
Slip Ring
20/48
