ERROR MESSAGE
☞ "Ovr-H"
This message is displayed when the Laminating Roller temp. is higher than 170℃.
This is caused by trouble in Heater Controller.
Contact to a supplier.
☞ "H-Err"
If laminating roller temp. is fluctuated by 25℃ in 0.5 sec., the message is displayed.
This is caused by trouble in temp. sensor.
Contact to a supplier.
☞ "STAND BY STATUS!!"
This message means the machine is in STAND BY mode.
Upper Roller set temp. is higher than 80℃ in system stop status,
STAND BY time system starts. after 2 hrs from it, the machine is in STAND BY MODE.
In this status, STAND BY STATUS message is blinking on LCD panel.
To release from STAND BY MODE, press RUN button in STAND BY mode.
☞ "POWER OFF!!"
This message means the machine is in POWER OFF mode.
1 hours after STAND BY mode, POWER OFF mode starts in the machine.
In the POWER OFF mode, LCD BACKLIGHT is off and this light will be on again for back to normal.
To release from POWER OFF MODE, press RUN button in POWER OFF mode.
POWER SAVE Status
21/48
