MAIN DEVICES
☞ Side Slitter & Rewinder
To slit film ends if a film roll width is wider than substrate.
Put the side slitters at a proper position to slit film.
Rewind the slitted films on Rewinder.
NOTE:
This device is designed to be moved up/downwards for feeding.
[
PROTOPIC III-540
]
WARNING :
Be careful to use this because sharp blade could be a cause of injury.
☞ Perforator
To cut a laminated results easily, perforator makes holes on film ends.
Position the device from the film ends by 1~3mm inside.
To make clear holes on films with adjust perforator Pressure adjustment bolt.
WARNING :
In the initial loading status, if the perforator is needed to be moved,
loosen the perforator Pressure adjustment bolt. Otherwise, blade or roller could be damaged.
☞ Skewing Wheel
To help cut the laminated results and this is used to avoid "torn film" for cutting process.
As the right picture, make the laminated results have curved line to have quality results.
WARNING :
If skewing wheel is not adjusted properly, laminated result could be folded.
CUTTING DEVICE
Film
Rewinder
Slit film ends with Side Slitter & Rewinder
Perforator Pressure Adjustment
26/48
