c)
Travelling Reduction Gears
Lube Point(s) –Level/Fill Plug.
Capacity –1 L (0.3 us gal).
6SHFLILFDWLRQ
:
SAE80W/90 Industrial Gear Oil for Close Motor.
Interval – Check level every 3 months or 150 hours of operation;change every 2 years or 1,200 hours of
operation.
5.5 Tire and Wheel
Tire replacement
*0*
recommends a replacement tire be the same size, ply and brand as originally installed on the
machine. Please refer to the Parts Manual for the part number of the approved tires for a particular
machine model. If not using a
*0*
approved replacement tire, we recommend that replacement tires
have the following characteristics:
a)
Equal or greater ply/load rating and size of original;
b)
Tire tread contact width equal or greater than original;
c)
Wheel diameter, width, and offset dimensions equal to the original;
d)
Approved for the application by the tire manufacturer (including inflation pressure and maximum
tire load).
Unless specifically approved by
*0*
do not replace a foam filled or ballast filled tire assembly with a
pneumatic tire. When selecting and installing a replacement tire, ensure that all tires are inflated to the
pressure recommended by
*0*
. Due to size variations between tire brands, both tires on the same axle
should be the same.
Wheel and tire replacement
The rims installed on each product model have been designed for stability requirements which consist
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
