4.2.2 Platform leveling
Only use the platform leveling function for slight leveling of the platform when the platform is in
low position.
Incorrect use could cause the load/occupants to shift or fall. Failure to do so could result in death
or serious injury.
Before platform level adjustment, identify the position of the platform.
To Level Up or Down –Position the platform/Level control switch Up or Down and
hold until the platform is level.
4.2.3 Platform rotation
To rotate the platform to the left or right, use the Platform Rotate control switch to
select the direction and hold until desired position is reached.
Do not swing or raise upper boom above horizontal when machine is out of level.
Do not depend on tilt alarm as a level indicator for the chassis.
To avoid tip over, lower platform to ground level. Then drive machine to a level surface before
raising upper boom.
To avoid serious injury, do not operate machine if any control lever or toggle switch controlling
platform movement does not return to the OFF or Neutral position when released.
If the platform does not stop when a control switch or lever is released, remove foot switch or use
emergency stop switch to stop the machine.
4.2.4 Turntable slewing
When swinging the turntable makes sure there is ample room for the upper
boom to clear surrounding walls, partitions and equipment.
Move the control handle on the platform or the control switch on ground to the
“Left” or “Right” and the turntable will rotate left or right.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
