5)
Jib lift switch (if equipped)
Provide raising and lowering of the jib.
6)
Platform rotate switch
Provides platform rotate controls.
Only use the platform leveling override function for slight leveling of the platform when
platform is lowered. Incorrect use could cause cause the load/occupants to shift or fall.
Failure to do so could result in death or serious injury.
7)
Platform leveling switch
A three position switch allows the operator to adjust the automatic self
leveling system. This switch is use to adjust platform level in situations such
as ascending/descending a grade.
When the machine is shut down the power/emergency stop switch must be positioned to the
OFF position to prevent draining the batteries.
8)
Power/Emergency stop switch
A two-position red mushroom shaped switch supplies power to
PLATFORM/GROUND SELECT switch when pulled out(on). When pushed
in(off), power is shut off to the PLATFORM/GROUND SELECT switch.
9)
Platform/Ground Select Switch
The three position, key operated switch supplies power to the platform control
console when positioned to PLATFORM. With the switch key turned to the
GROUND position only ground controls are operable. The three position, key
operated switch positions to middle, platform mode and ground mode shut off at
the same time.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
