Do not drive with upper boom out of transport mode except on a smooth, firm and level surface.
Do not drive machine on grades or side slopes exceeding those specified on machine nameplate.
Do not drive on slopes which exceed 5 degrees, or side slopes which exceed 3 degrees in working
state.
Do not drive on slopes which exceed 24 degrees, or side slopes which exceed 14 degrees in stowed
state.
Confirm the control of driving direction before traveling.
Be extremely caution when driving in reverse and at all times when driving with platform
elevated.
4.2.1.1Traveling forward and reverse
a) At Platform Controls, pull out Emergency Stop switch, start the engine, and activate
foot switch;
b) Position Drive/Steer control to “Forward” or “Reverse” hold for duration of forward
or reverse travel desired.
This machine is equipped with travelling direction indicator lights. The indicator lights on
platform console to inform that upper boom is over front axle (steer wheels), steer and
drive controls will move in opposite direction than indicated on machine placards.
If the indicator is illuminated, operate the Drive function in the following manner:
a) Check blue and yellow arrow on platform control panel and on chassis match or not,
confirm the travelling direction;
b) Toggle and loosen travelling direction confirmation switch.Operate the handle to drive
as needed within 5 seconds.
4.2.1.2 Steering
a)
At Platform Controls, pull out Emergency Stop switch and activate foot switch;
b)
Position the traveling/steering handle to the left or right side to turn wheel left or right,
accordingly;
c)
Turn the steering / steering handle to the right to operate the wheels to the right.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
