manualshive.com logo in svg

GMC SIERRA DENALI 2002, Manual

Share
Download
GMC SIERRA DENALI 2002 Manual Download Page 332

6-55

Used Replacement Wheels

CAUTION:

Putting a used wheel on your vehicle is
dangerous. You can’t know how it’s been used or
how far it’s been driven. It could fail suddenly
and cause a crash. If you have to replace a wheel,
use a new GM original equipment wheel.

Tire Chains

CAUTION:

Don’t use tire chains. There’s not enough
clearance. Tire chains used on a vehicle without
the proper amount of clearance can cause
damage to the brakes, suspension or other vehicle
parts. The area damaged by the tire chains could
cause you to lose control of your vehicle and you
or others may be injured in a crash.

Use another type of traction device only if its
manufacturer recommends it for use on your
vehicle and tire size combination and road
conditions. Follow that manufacturer’s
instructions. To help avoid damage to your
vehicle, drive slowly, readjust or remove the
device if it’s contacting your vehicle, and don’t
spin your wheels.

If you do find traction devices that will fit, install
them on the rear tires.

Summary of Contents for SIERRA DENALI 2002











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands