manualshive.com logo in svg

GMC SIERRA DENALI 2002, Manual

Share
Download
GMC SIERRA DENALI 2002 Manual Download Page 313

6-36

Brake linings should always be replaced as complete
axle sets.

See “Brake System Inspection” in Section 7 of this
manual under Part C “Periodic Maintenance
Inspections.”

Brake Pedal Travel

See your dealer if the brake pedal does not return to
normal height, or if there is a rapid increase in pedal
travel. This could be a sign of brake trouble.

Brake Adjustment

Every time you make a brake stop, your disc brakes
adjust for wear.

Replacing Brake System Parts

The braking system on a vehicle is complex. Its many
parts have to be of top quality and work well together if
the vehicle is to have really good braking. Your vehicle
was designed and tested with top

-

quality GM brake

parts. When you replace parts of your braking

system 

--

 for example, when your brake linings wear

down and you need new ones put in 

--

 be sure you get

new approved GM replacement parts. If you don’t, your
brakes may no longer work properly. For example, if
someone puts in brake linings that are wrong for your
vehicle, the balance between your front and rear brakes
can change 

--

 for the worse. The braking performance

you’ve come to expect can change in many other ways if
someone puts in the wrong replacement brake parts.

Battery

Your new vehicle comes with a maintenance free
ACDelco

R

 battery. When it’s time for a new battery, get

one that has the replacement number shown on the
original battery’s label. We recommend an ACDelco
battery. See “Engine Compartment Overview” in the
Index for battery location.

WARNING: Battery posts, terminals and related
accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and
reproductive harm. Wash hands after handling.

Summary of Contents for SIERRA DENALI 2002











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands