manualshive.com logo in svg

GMC SIERRA DENALI 2002, Manual

Share
Download
GMC SIERRA DENALI 2002 Manual Download Page 152

2-79

Low Coolant

This message is displayed
when the cooling system is
low on coolant.

The engine may overheat. See “Engine Coolant” in the
Index and have your vehicle serviced as soon as you can.

Check Coolant Temp

This message is displayed
when the cooling system
temperature gets hot.

Check the coolant temperature gage and the coolant
level. See “Engine Coolant” and “Engine Coolant
Temperature Gage” in the Index.

Engine Overheated

This message is displayed
when the cooling system
temperature gets too hot.

This message will be displayed after the air conditioning
system has automatically turned off for the engine
coolant protection mode. See “Engine Overheating” 
in the Index for further information.

Reduced Engine Power

This message is displayed
when the cooling system
temperature gets too hot
and the engine further
enters the engine coolant
protection mode.

See “Engine Overheating” in the Index for 
further information.

Summary of Contents for SIERRA DENALI 2002











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands