GMC 2008 Savana Van Owner'S Manual Download

Page: 119 / 402

The main components of the instrument panel are the following:

A. Air Outlets. See Outlet Adjustment on page 3-21.

B. Driver Information Center Buttons. See Driver

Information Center (DIC) on page 3-42.

C. Turn Signal/Multifunction Lever. See Turn

Signal/Multifunction Lever on page 3-7.

D. Hazard Warning Flasher Button. See Hazard

Warning Flashers on page 3-6.

E. Instrument Panel Cluster. See Instrument Panel

Cluster on page 3-25.

F. Shift Lever. See Starting the Engine on page 2-20.

G. Climate Control System. See Climate Control System

on page 3-19.

H. Audio System(s). See Audio System(s) on

page 3-63.

I. Exterior Lamp Controls. See Exterior Lamps on

page 3-13.

J. Instrument Panel Brightness Control. See Instrument

Panel Brightness on page 3-16.

K. Cruise Control Buttons. See Cruise Control on

page 3-10. Fast Idle System (If Equipped).
See DURAMAX

Diesel Manual for more

information.

L. Tilt Lever. See Tilt Wheel on page 3-7.

M. Horn. See Horn on page 3-6.

N. Audio Steering Wheel Controls. See Audio Steering

Wheel Controls on page 3-82.

O. Tow/Haul Mode Button. See “Tow/Haul Mode” under

Towing a Trailer on page 4-28.

P. Accessory Power Outlets/Cigarette Lighter.

See Accessory Power Outlet(s) on page 3-18 and
Ashtray(s) and Cigarette Lighter on page 3-18.

Q. StabiliTrak

Button (If Equipped). See StabiliTrak

System on page 4-5.

R. Airbag Off Switch. See Airbag Off Switch on

page 1-66.

S. Storage Compartment. See Storage Areas on

page 2-34.

T. Passenger Airbag Status Indicator. See Passenger

Airbag Status Indicator on page 3-30.

U. Rear Heating System (If Equipped). See Rear

Heating System on page 3-22.

3-5

Summary of Contents for 2008 Savana Van



















































































































































































































































































































































































































Search results

Summary of Contents for 2008 Savana Van

Reviews:

Related manuals for 2008 Savana Van

Brands by name

Popular brands

GMC 2008 Savana Van, Owner'S Manual

Search results

Summary of Contents for 2008 Savana Van

Reviews:

Related manuals for 2008 Savana Van

Brands by name

Popular brands