manualshive.com logo in svg

GMC 2008 Savana Van, Owner'S Manual

The GMC 2008 Savana Van Owner's Manual is an essential guide for every owner, providing detailed instructions and vital information about operating and maintaining their vehicle. This comprehensive manual ensures a smooth and safe driving experience. Download your free copy from manualshive.com and unleash the full potential of your Savana Van.

Share
Download
background image

CAUTION:

(Continued)

Do not run the engine if there is a leak. If you
run the engine, it could lose all coolant. That
could cause an engine fire, and you could be
burned. Get any leak fixed before you drive the
vehicle.

If there seems to be no leak, start the engine again.
See if the engine cooling fan speed increases when idle
speed is doubled by pushing the accelerator pedal
down. If it does not, your vehicle needs service. Turn off
the engine.

Notice: Engine damage from running the engine
without coolant is not covered by the warranty.

Notice: Using coolant other than DEX-COOL

®

may

cause premature engine, heater core, or radiator
corrosion. In addition, the engine coolant could
require changing sooner, at 30,000 miles (50 000 km)
or 24 months, whichever occurs first. Any repairs
would not be covered by the warranty. Always use
DEX-COOL

®

(silicate-free) coolant in the vehicle.

5-29

Summary of Contents for 2008 Savana Van



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Savana Van

Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
SuperATV AAB-P-RZR900-K2-001 Installation Instructions preview
AAB-P-RZR900-K2-001
Brand: SuperATV Pages: 3
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Edelbrock 460 Ford Installation Instructions preview
460 Ford
Brand: Edelbrock Pages: 2
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16
GEMINI TECHNOLOGY 514F User Manual preview
514F
Brand: GEMINI TECHNOLOGY Pages: 9
HawksHead TRACK MASTER Instruction Manual preview
TRACK MASTER
Brand: HawksHead Pages: 10
AutoMaxi SUPRA 44 Montage preview
SUPRA 44
Brand: AutoMaxi Pages: 2
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8
Kuda-Phonebase 291790 Installation Instruction preview
291790
Brand: Kuda-Phonebase Pages: 3
Volvo V60 Owner'S Manual preview
V60
Brand: Volvo Pages: 176
SSANGYONG Korando 2012 Manual preview
Korando 2012
Brand: SSANGYONG Pages: 1104

Brands by name

Popular brands

Load more brands