GMC 2008 Savana Van Owner'S Manual Download Page 287

Page: 287 / 402

Among those acts presumed to constitute tampering are
the acts listed below.

Insulation:

•

Removal of the noise shields or any underhood
insulation.

Engine:

•

Removal or rendering engine speed governor, if the
vehicle has one, inoperative so as to allow engine
speed to exceed manufacturer specifications.

Fan and Drive:

•

Removal of fan clutch, if the vehicle has one, or
rendering clutch inoperative.

•

Removal of the fan shroud, if the vehicle has one.

Air Intake:

•

Removal of the air cleaner silencer.

•

Modification of the air cleaner.

Exhaust:

•

Removal of the muffler and/or resonator.

•

Removal of the exhaust pipes and exhaust pipe
clamps.

Fuel Operated Heater (FOH) — Diesel
Engine:

•

Removal of the muffler.

5-47

Summary of Contents for 2008 Savana Van



















































































































































































































































































































































































































Search results

Summary of Contents for 2008 Savana Van

Reviews:

GMC 2008 Savana Van, Owner'S Manual, Page: 287 / 402

Search results

Summary of Contents for 2008 Savana Van

Reviews: