GMC 2008 Savana Van Owner'S Manual Download Page 273

Page: 273 / 402

4. Then fill the coolant recovery tank to the COLD

FILL mark.

5. Put the cap back on the coolant recovery tank, but

leave the radiator pressure cap off.

6. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fan.

7. By this time, the coolant level inside the radiator

filler neck may be lower. If the level is lower, add
more of the proper DEX-COOL

coolant mixture

through the filler neck until the level reaches the
base of the filler neck.

8. Then replace the pressure cap. At any time during

this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap.

5-33

Summary of Contents for 2008 Savana Van



















































































































































































































































































































































































































Search results

Summary of Contents for 2008 Savana Van

Reviews:

GMC 2008 Savana Van, Owner'S Manual, Page: 273 / 402

Search results

Summary of Contents for 2008 Savana Van

Reviews: