19
Controller Port:
Select correct controller port
（
Port A
、
B
、
C
、
D represent port OUT1
、
OUT2
、
OUT3
、
OUT4
）
.
Divider Port:
Select a correct SDV signal divider port. For further detail instruction
to each port of signal divider please see the SDV08 manual.
Start MAC-Address:
The default value is 0
，
please refer to the previous single
setting section for further details.
Columns
：
Represents how many columns of the LED screen charged by the
controller selected port or divider port
Rows
：
Represents how many rows of the LED screen charged by the controller
selected port or divider port.
MX-Offset:
The column amount which the LED screen horizontal displacement.
Image displayed from which column. We usually use the default value is 0.
MY-Offset
：
The row amount which the LED screen vertical displacement.
Image displayed from which row. We usually use the default value is 0
PX-Offset:
(This feature is temporarily out of use)
PY-Offset
：
(This feature is temporarily out of use)
Build:
Generate a simulated image of the LED screen according to the number of
rows and columns. Users can set the address for each LED screen on the simulated
image. The intelligent setting method is as follows:
Click each LED screen from the first one of the signal input along the actual
connection mode of the signal cable to the last one.
