16
3.4 Address Setting
There are 3 methods for set the screen display address by this control software:
single setting, multiple setting (whole screen setting) and intelligent setting. Usually
we only use the multiple setting or intelligent setting to set the screen’s display
address, as shown below:
3.4.1. Address setting method 1: (Not normally used)
Function:
Set one LED panel to be displayed in which column and row.
Step1.Controller Port:
Select correct control port which connecting this LED panel.
Step2.MAC-Address
：
Represents the ordinal number for the LED panel which
connects the controller selected port (Port A, B, C, D).
From the signal input of the first piece of LED screen, MAC-Address starting at 0 and
increase by 1.MAC Address=0,1,2,3,4…(Take the above picture for example, LED
panel 0’s MAC Address=0, LED panel 1’s MAC Address=1,LED panel 2’s MAC
Address=2, LED panel 3’s MAC Address=3,LED panel 4…)
Step 3
，
Column In
：
Represents the column for LED panel displayed in, start from 0.
Step 4
，
Row In
：
Represent the row for LED panel displayed in, start from 0.
Step 5
，
Send
：
Click the “Send” button when you finish setting one LED panel
address.
Use this method, you can set the LED panels’ display address one by one. Please
