15
Output Resolution (Output resolution scaling)
: You can make the input video totally
output to the LED screen which have specified pixels by setting the output resolution.
For example, the video input resolution is 1920
×
1080, the LED screen pixel only
have 1024
×
768,if you want to display all of the video on this LED screen ,please set
the Output Resolution: W:1024, H: 768.
H-Mirror:
LED screen display to a mirrored display in Horizontal direction, usually
be used in a symmetrical display effect.
DMX512 on/off:
Used for setting the DMX512 port number. Please select OFF if
there is no DMX512 signal input to the controller.
Port:
Select correct controller port.
Series:
The style of the product.
LED-RGB
：
PIN1~PIN3 represents the order of red, green and blue for LED lamps’
pin .You can adjust this item if the colors is wrong.
Color Temperature:
You can select the custom color temperature values and also can
adjust the RGB (red-green-blue) color values according to the actual application. The
color temperature range is 0~255.
Gamma
It is mainly used to adjust the gray scale of the LED screen. You can adjust
the contrast of LED screen by setting the gamma value. If the gray scale of the LED
screen is inconsistent, you can try to improve the effect by sending the gamma.
Setting method: select Red/Green/Blue, gray scale level is 65536, gamma coefficient
is 2.2 and then click “Send Gamma”. Different IC chip there is different Gamma level,
such as, MBI 5041’s level is 65536,MBI 5020’s level is 4096.
Export:
You can export a file to save the current parameter data. Once you lost the
parameters you can import the file and recovery the parameter data.
Import:
Import a file to recovery the parameter data.
Read:
Read the parameters from the current VSP-F2L4 controller (Usually not need
to use).
Send:
Click the “Send” button to check the change of LED screen after you complete
the setting of the parameters.
Correct on/off
（
Calibration switch
）
: Turn on the switch for calibrated LED screen
the display effect will be better. Turn off the switch for uncalibrated LED screen
otherwise only can get a white image picture.
Screen play
（
Lock
）
：
Suspend or display the LED screen.
Screen on/off
（
Screen switch
）
:
Play or turn off the LED screen.
Status ON/OFF:
You can turn on or turn off the LCD display function of LED panels.
Click the status open/closed, and then click the Save in the control software to take
effect.
Operation
：
Make the display image rotate 90 degrees, only valid for our BAtn series
products current.
Brightness:
You can drag the cursor to adjust the brightness of the LED screen.
Initialize Panel Types:
Initialize Panel Types be only used when leaving factory, and
not need description here.
