background image

8

9

and GCS305 are available separately as ac-

cessories.

Due to the wireless module in the 

gluco-com-

fort

 blood glucose meter BGM105, the use 

of this device in certain secure areas, such as 

intensive care stations or in airplanes, is not 

allowed.

The original packaging of the 

gluco-comfort

 

blood glucose system with the wireless mod-

ule contains the following main components:

1. 

gluco-comfort

   meter BGM105

2. 

gluco-comfort

   test strips BGS105

3. 

gluco-comfort

   control solution GCS105

4. 

gluco-comfort

   lancing device LDV105

5. 

gluco-comfort

   lancets LCE105

The original packaging of the 

gluco-comfort

 

blood glucose system without the wireless 

module contains the following main compo-

nents:

1. 

gluco-comfort

   meter BGM205

2. 

gluco-comfort

   test strips BGS105

3. 

gluco-comfort

   control solution GCS105

4. 

gluco-comfort

   lancing device LDV205

5. 

gluco-comfort

   lancets LCE105

In addition, further components are included:

–   Battery

–   Meter operating manual

–   Package insert for test strips

–   Package insert for control solution

–   User instructions for the lancing device

–   Meter short instructions

–   Bag

Additional important information concern-

ing the test strips:

Please observe the separate user instructions 

for the test strips.

–   The test strips could be damaged by effects 

of temperature and light. For this reason, 

they should be used immediately after  

being removed from the test strip con-

tainer. 

–   The test strips may not be used past the 

expiration date. The test strips can be used 

four months after the container has been 

opened. When you open the container for 

the first time, write down the date on the 

container. 

–   Close the container carefully after remov-

ing the test strip. Always leave the contain-

er closed and keep it in a cool, dry place. 

You can check your momentary blood 

glucose level with high precision with the 

Biocomfort blood glucose measuring system. 

Only your doctor can determine whether 

your blood glucose levels are an indication 

of a diabetic illness requiring treatment, 

however.

The Biocomfort blood glucose measuring 

system includes many components, such as 

test strips, the test strip container, batteries, 

etc., which can be misplaced or can be 

dangerous for children. For this reason, keep 

your blood glucose measuring system out of 

the reach of children. Also, make sure the 

meter can’t be misused while in use.

If there are signs of damage or malfunctions, 

the Biocomfort meter cannot be used. 

Please use only the 

gluco-comfort 

test strips 

BGS105 and 

gluco-comfort 

control solutions 

GCS105, GCS205 or GCS305.  

The 

gluco-comfort

 control solutions GCS205 

 In

tr

od

uc

tion

1

Summary of Contents for BGM 105





























Reviews: