gluco-comfort BGM 105, Operating Manual

Page: 15 / 28

28 29
Step 1:
Remove the cap of the lancing device.
Step 2:
Insert a new lancet in the lancing device.
3.3 Getting a drop of blood for the blood
glucose measurement
Using the gluco-comfort lancing device
LDV105/LDV205 allows you to get a blood
sample gently, with almost no pain, and
hygienically.
Attention:
To avoid infections, use a new lancet for
every lancing.
When the skin is lanced, the finely ground
surface of the lancet dulls, which makes it
potentially painful to use a used lancet.
Note:
You can also start the meter by pressing the
On/Off button without inserting a test strip in
the test strip receptacle. Steps 3 - 6 are car-
ried out the same way as described before.
As opposed to the first way with the inserted
test strip, the test strip symbol on the display,
as described under Step 7, blinks as a prompt
to the user to insert the test strip now.
Step 9:
After the test strip has been properly posi-
tioned, the meter signals that it is ready for
measuring with two short beeps. In addition,
a drop symbol blinks on the display.
Step 3:
Remove the protective cap from the lance by
turning and pulling it off.
Step 4:
Replace the cap of the lancing device and
set it to the desired lancing depth (see figure
on page 30).
C
ar
ry
in
g o
ut t
he b
lo
od g
lu
co
se m
ea
su
re
m
en
t
3