gluco-comfort BGM 105, Operating Manual

Page: 10 / 28

18 19
Step 2:
In order to select the other unit of measure-
ment, press the MEM button.
Step 3:
If you are finished making settings, you can
exit the settings menu by pressing the On/Off
button. Otherwise, continue making settings
by pressing the SET button.
2.6 Configuring the measured value
memory
Note:
The blood glucose meter stores the measured
blood glucose values. The measured value
memory can be configured so that the
measurements can be allocated to eight
different users.
To do this, the measured value memory must
be enabled for the individual users.
2.6.1 Configuration of the model variant
BGM205
In its delivered condition, the measured
value memory is only enabled for one user
(“User 1”).
The configuration of the measured value
memory can be found after the unit of
measurement setting in the settings menu
sequence.
Step 1:
To enable (or block) several measured value
memories, press the SET button until the
word “user” appears on the display in the up-
per right-hand corner (see figure), and to the
left of the word “user”, the number “1” ap-
pears. In the lower area of the display, either
the word “on” or “off” is blinking in addition.
This indicates whether the measured value
memory for user 1 is enabled or blocked at
this time.
mem
gluco-comfort
biocomfort
user
mem
gluco-comfort
biocomfort
mg/dL
mmol/L
G
et
tin
g s
ta
rt
ed
2