Metis micro user manual v1.6
4
To avoid any problem situations, devices are not allowed to be set up to send messages to
each other (e.g. relay controls). The standard messages generated by the devices can
cause massive communications between devices that will not be noticed until receiving
the next phone bill. User must make sure that he/she is able to monitor the
communication from and to the device (e.g. with a mobile phone or an automated PC-
software).
Warning! Under no circumstances connect 230VAC to the device.
Warning! Under no circumstances connect 230VAC to the device.
Warning! Under no circumstances connect 230VAC to the device.
Warning! Under no circumstances connect 230VAC to the device.
230V mains voltage installati
230V mains voltage installati
230V mains voltage installati
230V mains voltage installations can only be done by an authorized installation company.
ons can only be done by an authorized installation company.
ons can only be done by an authorized installation company.
ons can only be done by an authorized installation company.
1.2
1.2
1.2
1.2 Technical specification
Technical specification
Technical specification
Technical specification
Type
me
me
me
me
tis
tis
tis
tis
Micro
Micro
Micro
Micro
Version
This manual applies to v.1.0
GSM
SimCom SIM300
900/1800/1900 tri-band GSM
Connectors
2 digital inputs
1 output relay
Enclosure
water-resistant 130 x 80 x 35mm
Antenna
dual-band 900/1800, SMA-connector
Data transfer
SMS, call
Input voltage
+8...+24VDC, 1A
Power consumption
approximately 30mA / 400mA (peak)
Temperature range
-20...+50°C
CE-marking
According to Standard SFS-EN50130-4
Delivery package
me
me
me
me
tis
tis
tis
tis
Micro
Micro
Micro
Micro
GSM-antenna
installation and user manual
Manufacturer
Global Safety & Security Solutions Oy
www.globalsafety.fi
Restrictions
This product has not been designed, intended, inspected or
approved to be used in any life support related use or any other
critical application
If the device is used as a transmitter of information in any burglar
alarm system, rules and regulations of any authorities and
insurance companies must be followed when designing and
installing these type of systems.
