Global metis Micro, Installation And User Manual

Page: 12 / 24

Metis micro user manual v1.6
12
5 5 5 5 – – – – OPERATION OPERATION OPERATION OPERATION
5.1
5.1 5.1
5.1 Phone numbers
Phone numbers Phone numbers
Phone numbers
me
me me me tis tis tis tis Micro Micro Micro Micro has a 15 number phonebook. First number in the list is the master number.
From this phone it is possible to perform all configuration, queries and commands listed in
this manual. All other numbers (2-15) in the SIM-card can receive alarms and it is possible
to make status inquiries and relay commands but they are not entitled to change any
settings.
The phone numbers can be stored in the phonebook with SMS or with a phone call.
5.2
5.2 5.2
5.2 Alarms
Alarms Alarms
Alarms
When an alarm is detected me
me me me tis tis tis tis Micro Micro Micro Micro sends an alarm message according to the input’s
number. The alarm text can be set freely (see 6.2 – Alarm messages).
The direction of operation (N.O / N.C) of each input can be set individually (see 6.4 –Input
settings). It is also possible to specify whether it is reported when the input’s return to
normal state after an alarm (see 6.9 – General settings).
5.3 5.3 5.3 5.3 Entry / exit delay and response times Entry / exit delay and response times Entry / exit delay and response times Entry / exit delay and response times
Input 1 can have an entry / exit delay set. If me
me me me tis tis tis tis Micro Micro Micro Micro is disarmed during the delay time-
window no alarm messages are delivered. The same applies when the device is armed it
activates after the exit delay. The delay is equally long to both directions.
Input 2 can have a response time set. This means that the inputs must be in alarming state
the set time before the alarm is delivered.