Metis micro user manual v1.6
6
If the device for some reason or other, can not achieve connection to GSM network, GSSS
will not bare any possible direct or indirect expenses caused by this failure.
The person installing the device must be properly educated and trained. If you are not
certain about the installing of this device, contact a distributor or the manufacturer of the
device. All devices must be thoroughly tested when doing implementation.
To avoid any problem situations, devices are not allowed to be set up to send messages to
each other (e.g. relay controls). The standard messages generated by the devices can
cause massive communications between devices that will not be noticed until receiving
the next phone bill. User must make sure that he/she is able to monitor the
communication from and to the device (e.g. with a mobile phone or an automated PC-
software).
To avoid interfering with explosive operations turn the device OFF if a blasting area or
other potentially explosive atmosphere occur.
To prevent unreasonably big phone bills metis Micro has a lock-up feature that stops the
device from sending messages after factory set limits. This is designed to prevent for
example a broken detector causing unlimited number of alarms.
Note!
Note!
Note!
Note! In no circumstances, the device is allowed to be conn
In no circumstances, the device is allowed to be conn
In no circumstances, the device is allowed to be conn
In no circumstances, the device is allowed to be connected to 230VAC voltage,
ected to 230VAC voltage,
ected to 230VAC voltage,
ected to 230VAC voltage,
because of any danger to life or danger of fire. Only authorized personnel can perform
because of any danger to life or danger of fire. Only authorized personnel can perform
because of any danger to life or danger of fire. Only authorized personnel can perform
because of any danger to life or danger of fire. Only authorized personnel can perform
wiring to 230V electric networks.
wiring to 230V electric networks.
wiring to 230V electric networks.
wiring to 230V electric networks.
Copying, altering and distribution of any part of this document are forbidden without
written permission from the manufacturer.
1.4 Warranty and maintenance
1.4 Warranty and maintenance
1.4 Warranty and maintenance
1.4 Warranty and maintenance
There is a limited manufacturer’s warranty and general service terms for these devices.
These terms can be acquired from manufacturer.
