Global metis Micro, Installation And User Manual

Page: 13 / 24

Metis micro user manual v1.6
13
5.4 5.4 5.4 5.4 Backup call Backup call Backup call Backup call
me
me me
me tis
tis tis
tis Micro
Micro Micro
Micro can be configured to make a phone call after sending SMS. The device makes
the phone call consecutively to all number in the phonebook. The call routine is performed
3 times. The backup call must be answered or else the device moves on to calling the next
number on the list.
In addition to answering the call, a call back to the device must be performed, or the
device will continue to call all numbers defined, even if the phone call is answered.
me
me me
me tis
tis tis
tis Micro
Micro Micro
Micro waits for 30 seconds after each call to receive a call back to end the call
routine.
The backup call feature is input sensitive and can be activated as described in 6.4 – Input
Settings.
The calling sound from the device is 4-times-short-peep -sound.
5.5
5.5 5.5
5.5 Lock
Lock Lock
Lock----up
up up
up
If me
me me me tis tis tis tis Micro Micro Micro Micro detects over 20 alarm events in one hour the device locks up to prevent
unnecessary message sending. When the device is locked-up the red light (wait/fault) is
on.
Also if more than 60 messages of any type (interval sendings, alarms, status info) are sent
in one hour, the device locks-up.
The lock-up can be dismantled either by calling the me
me me me tis tis tis tis Micro’s Micro’s Micro’s Micro’s phone number from any
authorized (listed in the phonebook) phone number or by waiting for 6 hours for the
automatic dismantling.
When me
me me me tis tis tis tis Micro Micro Micro Micro is in the lock-up state, the device neither sends nor receives any SMS
commands. All commands and queries received during the lock-up are ignored and
erased.