Page 18
Global Water
●
(800)876-1172
●
www.globalw.com
3
Using Global Logger Software
Chapter 3
Hardware Connection
Connect the DB-9 female connector of the included communication cable (RS232C) to the COM 1 serial
port on your computer. If COM 1 is being used, either disconnect and/or disable the device on COM 1 or
connect to COM 2*.
Double-click the Global Logger** icon on your desktop if you created a desktop shortcut during
software setup. Otherwise, access the directory in which your
Global Logger.exe
file is located
and double-click on the file. If you have not installed the Global Logger software or if you want
to create a desktop icon, see
Global Logger Software Installation
***. Note that the screen-
shots in
Chapter 3: Using Global Logger Software
represent those of an eight channel logger
(GL400-7-1). If you own a different model such as the GL400-1-1, Global Logger will display
differently.
Global Logger Startup
Connect the DB-9 male connector
of the communication cable
(RS232C) to your GL400 COM
port.
DB-9 connector
* See
Comm Failure
, page 32.
** Copyright © Global Water Instrumentation, Inc. 2001
***See
Global Logger Software Installation
, pages 11 – 15
