Page 17
Global Water
●
(800)876-1172
●
www.globalw.com
Connect the battery’s blue spade lug to
the black terminal followed by the red
spade lug to the red terminal.
step 1: connect blue spade
lug to black terminal
step 2: connect red
spade lug to red terminal
Your sensor is now connected to the logger and is accessible* through the Global Logger** software pack-
age.
* See
Global Logger Startup
, page 18.
**Copyright © Global Water Instrumentation, Inc. 2001
For pulse sensors polarity is not an issue, so red and black wires may be inserted in either
P
terminals. In-
sert black/red wire into one
P
terminal and tighten until secure. Insert the black/red wire into the other
P
terminal and tighten until secure. There is no pulse signal terminal.
pulse: P terminals
Setup
