Page 32
Global Water
●
(800)876-1172
●
www.globalw.com
5
Troubleshooting
Comm Failure
If Global Logger software displays
Comm Failure
in the
Logger Name
field, perform the following steps
•
Verify that the communication cable is securely connected to the data logger and to your computer*.
•
Check the battery voltage on the logger**.
•
Make sure that your computer is correctly set up to use your communication channel 1 (COM 1). Refer
to the settings below for comparison.
* See
Hardware Connection
, page 18
**See
Battery
, page 31
Chapter 5
