Global-Tek (Singapore) Pte Ltd
Page 6
Wash/Rinse Arms
Wash and rinse arms are removable for daily cleaning purpose.
Auto Fill
Close all doors and push the POWER switch to ON. The machine fills automatically
from two different areas, final rinse & fill valve. Water is pre-heated in booster, and
flows into wash & rinse tanks. After the tanks are filled with required level, fill will
stop automatically.
Auto Timer
The Auto Timer switch is located on the left hand side of the control box. Designed
to save electrical power, it is adjusted to shut off pump and drive motors and optional
exhaust vent fan control after the last rack exits the dishwasher. To restart, slide a
rack into the machine or push MOTOR switch to ON. To change the time setting,
contact your local authorized service office.
Front Panel
Stainless steel front panel conceals motors, pumps and plumbing.
Common Water Connection
A single water connection for Fill and Final Rinse is standard. Maximum feed
temperature to the machine is 65C with 15 - 20 psi incoming water pressure.
Excess
water pressure or temperature will cause damage to booster heater tank
.
