Global Surgical SMR S 4000 Owner'S Manual Download Page 11

Page: 11 / 39

Section 3 Installation

3-1

3.1. Installation of the Chair

Installation of the chair is intended to be completed by qualified Global Surgical technicians. The end user should not

attempt to move the chair off the wooden skid and/or install the chair as there is risk of personal injury as well as damage

to the chair.

Refer to Table 2-1 and Figure 3-1 for clearance requirements and determine an appropriate installation site. The

installation should be close enough to a 115 VAC 20A wall receptacle to be reached by the 13 foot (4 m) power cord.

When planning an installation site, ensure the base is positioned where accessibility is not hindered by these limits. Also

ensure the floor is level. An uneven floor may allow the chair to wobble which is undesirable during use with the patient.

Figure 3-1 Overall Side View Dimensions

38”

(965 mm)

79”

(2007 mm)

52.5”

(1334 mm)

47”

(1194 mm)

21”- 38”

(553 mm - 965 mm)

WARNING

IT IS HIGHLY RECOMMENDED THAT THE INSTALLATION OF THIS

EQUIPMENT BE PERFORMED BY QUALIFIED TECHNICIANS. INSTALLATION

BY UNQUALIFIED INDIVIDUALS COULD RESULT IN PERSONAL INJURY.

Summary of Contents for SMR S 4000








































Search results

Summary of Contents for SMR S 4000

Reviews:

Related manuals for SMR S 4000

Brands by name

Popular brands

Global Surgical SMR S 4000, Owner'S Manual

Search results

Summary of Contents for SMR S 4000

Reviews:

Related manuals for SMR S 4000

Brands by name

Popular brands