Global Surgical SMR S 4000 Owner'S Manual Download Page 6

Page: 6 / 39

Section 1 Important Safety Instructions

1-3

WARNING

TO PREVENT RISK OF INJURY OR RISK OF DAMAGE TO THE CHAIR, KEEP

ALL OBJECTS AND BODY PARTS OUT FROM UNDER THE CHAIR WHILE THE

CHAIR IS IN MOTION. ALSO INSTRUCT THE PATIENT TO MINIMIZE MOVE

MENT WHILE THE CHAIR IS IN MOTION.

WARNING

PATIENTS ENTERING OR EXITING THE CHAIR IN A POSITION OTHER THAN

THE HOME/AUTO RETURN POSITION COULD BE INJURED OR COULD CAUSE

DAMAGE TO THE EQUIPMENT.

CAUTION

WHEN USED IN CLINICAL OR RESIDENTIAL AREAS NEAR RADIO OR TV

UNITS, THIS EQUIPMENT MAY BE SUBJECTED TO RADIO INTERFERENCE.

TO AVOID ADVERSE ELECTROMAGNETIC EFFECTS, DO NOT OPERATE THIS

EQUIPMENT NEAR RF ENERGY EQUIPMENT.

CAUTION

TO PREVENT ANY POTENTIAL ELECTROMAGNETIC INTERFERENCE, DO NOT

USE ANY KIND OF CELLULAR PHONE NEAR THE EQUIPMENT.

CAUTION

THIS EQUIPMENT NEEDS SPECIAL PRECAUTIONS REGARDING EMC

(ELECTROMAGNETIC COMPATIBILITY) AND NEEDS TO BE INSTALLED AND

PUT INTO SERVICE ACCORDING TO THE EMC INFORMATION PROVIDED IN

APPENDIX A OF THIS MANUAL.

CAUTION

PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT CAN AFFECT

MEDICAL ELECTRICAL EQUIPMENT.

CAUTION

REPLACEMENT PARTS, SUCH AS CABLES, MUST BE PURCHASED

THROUGH GLOBAL SURGICAL

CORPORATION TO ENSURE PROPER

COMPLIANCE REQUIREMENTS. THE USE OF OTHER CABLES MAY AFFECT

EMC PERFORMANCE. UNAUTHORIZED USE OF THESE ITEMS WILL VOID

WARRANTY AND MAY CAUSE INJURY TO YOU, OTHERS AND/OR THE

EQUIPMENT.

CAUTION

DO NOT OVERTIGHTEN THE ADJUSTMENT NUT OR THE PINS IN THE UPPER

LINK WILL BREAK.

CAUTION

DO NOT USE SCOURING MATERIALS SUCH AS SCOTCH-BRITE® ON VINYL OR

PLASTIC SURFACES FOR STUBBORN STAINS. THESE MATERIALS WILL

DAMAGE THESE SURFACES.

CAUTION

SHOULD YOU DESIRE TO USE OTHER CLEANING METHODS, CAREFULLY TRY THEM

IN AN INCONSPICUOUS AREA TO DETERMINE POTENTIAL DAMAGE TO THE

MATERIAL. NEVER USE HARSH SOLVENTS OR CLEANERS WHICH ARE INTENDED

FOR INDUSTRIAL APPLICATIONS. TO CLEAN STAINED OR SOILED AREAS, A SOFT

WHITE CLOTH IS RECOMMENDED. AVOID THE USE OF PAPER TOWELS.

CAUTION

CLEANING PRODUCTS MAY BE HARMFUL/IRRITATING TO YOUR SKIN, EYES, ETC.

USE PROTECTIVE GLOVES AND EYE PROTECTION. DO NOT INHALE OR SWALLOW

ANY CLEANING PRODUCT. PROTECT SURROUNDING AREA/CLOTHING FROM

EXPOSURE. USE IN A WELL-VENTILATED AREA. FOLLOW ALL PRODUCT

MANUFACTURERS’ WARNINGS. NAUGAHYDE CANNOT BE HELD RESPONSIBLE FOR

DAMAGE OR INJURIES RESULTING FROM THE USE OR MISUSE OF CLEANING

PRODUCTS.

Summary of Contents for SMR S 4000








































Search results

Summary of Contents for SMR S 4000

Reviews:

Related manuals for SMR S 4000

Brands by name

Popular brands

Global Surgical SMR S 4000, Owner'S Manual

Search results

Summary of Contents for SMR S 4000

Reviews:

Related manuals for SMR S 4000

Brands by name

Popular brands