LSX3100 User Manual, January 2017
© 2017 Global Payments Inc.
29
CONFIDENTIAL
Uninterruptible Power Supply (UPS)
UPS Figure A
UPS Figure B
There are four status indicator lights on the front panel of the Back-UPS (UPS Figure B):
1. On Line (green) is lit when AC power is powering the Battery Backup outlets.
2. On Battery (yellow) is lit when the battery of the Back-UPS is powering equipment connected
to the Battery Backup Outlets.
3. Overload (red) is lit when power demand has exceeded the capacity of the Back-UPS.
4. Replace Battery (red) is lit when the battery is near the end of its useful life.
UPS Problem
Diagnostics
The On Battery light (light #2
– UPS
Figure B) on the front of the UPS is
yellow. The UPS sounds four beeps
every 30 seconds.
The backup UPS is running on battery and powering
equipment connected to the battery backup outlets.
Consider saving work in progress in the event the unit
shuts down.
UPS sounds a continuous beeping.
The backup UPS battery has reached a low battery
condition, and battery run-time is very low.
1. Promptly save work in progress and exit all open
applications.
2. Shutdown the OS, computer and UPS.
The Overload light (light #3
– UPS
Figure B) on the front of the UPS is red.
The power demand has exceeded the capacity of the
UPS.
UPS sounds a continuous tone.
Battery backup outlets are overloaded.
Circuit breaker button located on the
rear panel of the UPS extends out.
An overload forced the UPS to disconnect from the AC
power.
1. Disconnect non-essential equipment.
2. Reset the circuit breaker by pressing the circuit
breaker button back in place.
The Replace Battery light (light #4
–
UPS Figure B) is red. The battery chirps
for one minute every five hours.
Battery has failed its automated diagnostic test. The
battery is near the end of its useful life, or the battery is
not connected.
A battery near the end of its useful life has insufficient run
time. Replace the battery.
1
2
3
4