WARNING
Risk Of Electrical Shock
• Turn off power prior to performing any maintenance.
• Verify supply voltage accuracy.
• Ensure all electrical and grounded connections are
in accordance with the National Electrical Code and
any other applicable local code requirements.
• All wiring connections should be capped with
approved wire connectors.
The warnings, precautions, and instructions
discussed cannot cover all possible conditions and
situations that may occur. Failure to heed these warnings
may result in property damage and personal injury.
General Safety Information
• To reduce the risk of property damage, personal
injury, electric shock, falling equipment, and other
hazards please read all instructions and warnings.
• Installation, service, and maintenance should be
• All parties must follow proper safety procedures
and precautions at all times.
• Do Not Install Damaged Products!
9
Wall Mounted Water Bottle
Refilling Station
14
16
15
CAUTION
Make sure all wires are
tucked in before attaching
cover plate to lower cover.
Connect reset cable to activation button
• Connect the Reset Button connection cable to
the Activation Buttons located at the top of the
filter access door frame.
• Reinstall the filter access door using the provided key.
• Unit is now ready for use.
Reset button connection
Reattach lower cover
• Reattach the Lower Cover to the Cooling System
using (4) H1 anti-theft screws.
• Fasten the Lower Cover to the bottom of the
Stainless Steel Pan using (2) H1 anti-theft screws.
• Remove the filter access door using
the provided key.
H5
H1
H1
10
b82045fc-0b136962-90871f19-f891407c
2
