5
Wall Mounted Water Bottle
Refilling Station
Remove top mounting bracket
Using a Phillips head screwdriver, remove the
Top Wall Mount Bracket fastened to the rear of
the Bottle Filler Top Assembly by removing
(1) screw. Set bracket aside and save screws for
installation.
Attach gasket
Attach Gasket to the bottom of the Bottle Filler
Top Assembly as shown.
Attach bottle filler
Flip Bottle Filler Top Assembly right-side-up and carefully
feed connections though the Stainless Steel Pan hole.
Ensure gasket is seated properly and lies flat. Attach
Bottle Filler Top Assembly to the Stainless Steel Pan
using (2) H3 screws.
Remove back plate
Using a Phillips head screwdriver, remove Back Plate
from the rear of the Bottle Filler Top Assembly by
removing (3) screws. Set Back Plate aside and save
screws for reinstallation.
6
Discard after
removal
Assembly Instructions
3
4
5
6
Note: Ensure gasket is seated properly and
lies flat so there are no gaps.
4
4
5
7
H3
4
8
5
3X
Stainless
Steel Pan
b82045fc-0b136962-90871f19-f891407c
